The density test conforms to ISO 2758 (Hydrostatic Method)

• Using KERN/Sartorius precision balance (upgradable to Mettler Toledo) Reading accuracy from 1.0 to 0.1 mg. The balance can be calibrated by dead weights

• Incorporating a damper system to counteract vibration

Automatic water refill when empty

Separate grippers to handle wet and dry operations to avoid water contamination

• Dry and wet tests in the ratio of 1:2 to remove excessive bubbles attaching to the sample

Discharging the samples according to the test results

The hardness test conforms to ISO 7619 and ASTM D 2240

Each sample is carried out for 3. The default measuring time for each test is 3 sec and the time is adjustable from 0 to 99 sec

Using the Bareiss "digitest II" as the hardness testing system. The hardness accuracy is 105 Shore A

As the sample is dropped onto the testing table, it will get transported to the first testing position and the rest of the subsequent testing positions automatically. Each testing position is programmed to ensure the tests are done in the right locations of the sample

• A hardness test will not be performed on a vacant slot of the testing table

An individual test model is available.

• Load sustainable testing table and all other mechanical components